API Valve Trim Numbers Explained: A Practical Trim Chart Guide

API Valve Trim Numbers Explained: A Practical Trim Chart Guide

On this page
API valve trim numbers identify material combinations used for critical internal valve components. Understanding these numbers helps engineers and buyers verify valve specifications and avoid material mismatches.

This guide provides a practical API trim chart covering common trim numbers, materials, and their application in API 600 and API 602 valves.

1. What Is Valve Trim?

Valve trim refers to designated internal components involved in valve operation and sealing, including:

  • Stem: Transfers operating force to the closing element.

  • Seat surface: Provides the sealing interface inside the valve body.

  • Disc/Wedge surface: Contacts the seat to achieve shutoff.

  • Backseat: Provides an additional sealing interface where applicable.

The trim number identifies specified internal material combinations, not the valve body material.

2. What Do API Trim Numbers Mean?

API valve trim numbers represent predefined material combinations for valve internals.

For example, API Trim 8 commonly specifies a 13Cr stainless steel stem, a CoCr-A hardfaced body seat, and a 13Cr wedge seating surface.

Trim numbers are material identifiers, not performance rankings. A higher number does not necessarily indicate better performance.

3. API Trim Chart: Common Numbers and Materials

The following valve trim number chart summarizes frequently specified combinations.

Trim No. Seat Surface Disc/Wedge Surface Stem
5 CoCr-A CoCr-A 13Cr
8 CoCr-A 13Cr 13Cr
10 316 SS 316 SS 316 SS
12 CoCr-A 316 SS 316 SS

Notes:

  • 13Cr: Typically Type 410 stainless steel.

  • 316 SS: Type 316 stainless steel.

  • CoCr-A: Cobalt-chromium hardfacing alloy, commonly represented by Stellite 6.

This is a simplified reference chart. Exact material requirements must be verified against the applicable API standard edition.

4. How to Read the Trim Chart

First, locate the required trim number. Then compare the seat, disc/wedge, and stem material columns.

For example, Trim 5 uses hardfacing on both mating seating surfaces, while Trim 8 uses a hardfaced body seat with a 13Cr wedge surface.

The trim number does not necessarily identify the base material of the entire disc or wedge.

5. API 600 vs. API 602 Trim Applications

API 600 API 602
Steel gate valves Compact gate, globe, and check valves
Focus on gate valve trim Trim requirements depend on valve type and construction

Both standards address internal trim materials, but their requirements are not automatically interchangeable. Always verify the applicable edition.

6. What to Check Before Requesting a Quote

When submitting a valve inquiry, specify the valve type, size, pressure class, body material, trim number, and design standard.

For example:

Gate Valve, 6", Class 300, WCB Body, API 600, Trim 8, RF

Confirm any hardfacing requirements and operating conditions before finalizing the specification.

Conclusion

An API trim chart helps engineers and buyers identify valve trim materials quickly. Understanding the differences between common API valve trim numbers supports more accurate specifications and purchasing decisions.

For industrial valve inquiries, DERVOS can assist with reviewing trim material requirements and valve specifications.




Nickname*:
E-mail*:
Rate*:
Comments*:
About the author
Kevin Shi
Kevin is a technical expert with over 20 years of experience in the valve industry, specializing in the selection, design, and application of industrial valves, including but not limited to gate, globe, and ball valves. He excels at providing tailored technical solutions based on operational requirements and has led multiple valve system optimization projects in the energy and chemical sectors. Kevin stays updated with industry trends and technological advancements, is well-versed in industry standards, and offers full technical support from consulting to troubleshooting.