The features of a knife gate valve for some corrosive environment
- Dec 11,24
- Hits: 0
A knife gate valve is a component that utilizes a blade to cut through clogging of heavy liquids. These valves were designed to work in some of the most corrosi
Brief introduction of fully welded ball valves in petroleum industry
- Dec 11,24
- Hits: 0
Fully welded ball valves, act as one of the most trusted valves in the petroleum industry, suitable for oil & gas production, processing and distribution. It
Brief description of ISO15848 the Low Emission Test
- Dec 11,24
- Hits: 0
The low emission test is generally according to the standard ISO15848, and ISO15848-1 is a type test, where the number of switching times is relatively large, a
The Difference between Y Strainer and Basket Strainer
- Dec 11,24
- Hits: 0
A pipe strainer can capture and remove the impurities from the pipeline by interrupting the process flow with a perforated plate or screen mesh. Normally spea
Valve End Connection Types, Screwed, Flanged, Welded
- Dec 11,24
- Hits: 0
Screwed End Type Screwed end is simple connection method often used for small valves. This connection is usually made by machining the valve in and out of the
How should the valve be maintained during operation?
- Dec 11,24
- Hits: 0
The maintenance principles during valve operation are as follows:1. Keep the outside of the valve and the moving parts clean to protect the integrity of the val
RAL 9010-Our New Painting Color of Ball Valves!
- Dec 11,24
- Hits: 0
Today, we would like to show you some photos of ball valves we just manufactured. The uniformed paint color is RAL 9010. We also have special requirement on the
The Function of Valve Heating Jacket
- Dec 11,24
- Hits: 0
Many kinds of valves can have a heating jacket, such as gate valves, check valves and plug valves. A heating jacket is usually made of steel plate, and rolle
Water hammer effect and the preventive measures on pipeline
- Dec 11,24
- Hits: 0
Water hammer effect means that when the open valve is suddenly closed, due to the inertia of the pressure water flow, the shock wave of the water flow is genera
Three designs of Gate Valve Stem
- Dec 11,24
- Hits: 0
Three different bonnet/stem design configurations are used in the gate valve construction: the lower threaded rising stem, the non-rising stem and the upper thr
What is a steam trap?
- Dec 11,24
- Hits: 0
The function of a steam trap is to automatically eliminate non-condensable gases such as steam condensate and air in the heating equipment or steam pipes, and p
How to Judge the Valve Internal Leakage?
- Dec 11,24
- Hits: 0
Step 1: Calculating energy consumption -- Comparing the daily energy consumption, if the yield is reduced with the same raw material, then we judge initially th